Instalación Oficial del DCS SIMPLE RADIO

Visto, parece que ya lo sabe y lo arregla pronto

Con la nueva actualización Simple Radio no funciona con el Mirage F1.

Yo estoy sin pc ...; ¿en serio se han cargado el F1????

Qué le pasa al pc?

No se han cargado nada, simplemente la actualización del Mirage F-1 hace que SImple Radio no funcione con ese módulo, y Ciribob ya lo sabe y lo arrelagrá el finde,

Con la nueva actualización Simple Radio no funciona con el Mirage F1.

Yo estoy sin pc ...; ¿en serio se han cargado el F1????

Qué le pasa al pc?

Ya lo tengo de nuevo ...; últimamente estoy sufriendo reinicios cuando llevo un rato volando. Parece ser que la memoria ram no estaba funcionando bien; me la han cambiado por dos módulos de 32gb (antes tenía 4 módulos de 16gb)

Actualización de SR

2.1.0.2

Gracias por la info. Actualizando

Actualización de SRS. Tenedla hecha para esta noche.

Oído cocina

Hecho

Actualización de SRS. Importante para el Phantom, F15, 16, y A10.
Spoiler

This is another relatively big release adding an entirely new feature for **Receive Only Radios**.

The new Heatblur F-4E Phantom II has a secondary AUX radio which is receive only, and SRS as requested by them, has been updated to support this interesting nuance.

For more information make sure to read HB's excellent documentation available here https://f4.manuals.heatblur.se/systems/nav_com/uhf.html

Any radio that is receive only is still selectable (as you can change volume, channel etc) but only the ability to transmit is disabled. Any radio that is receive only will have RX listed after the frequency and modulation on the SRS overlays.

This release also adds a lot of minor fixes and improvements for the F15E, F16 and A10C II

Specifically for the A10C II - volume control of the AN/ARC-210 VHF/UHF radio is done by hitting Menu (and staying on the first page) - then rolling the channel selector wheel either up or down. To return to the main display, just hit menu again and the wheel will go back to a channel selector. The implementation isn't the best by me currently so make sure to scroll the wheel relatively slowly for the changes to be picked up, but it will work.

You can now (optionally) opt-out of expansion radios if they've been enabled by the server you've connected too. I've seen a few requests for this with people needing to edit LUA so hopefully this makes quite a few peoples lives easier. Expansion radios are virtual radios I've added to some aircraft to expand the options for communications (such as the Mig21). The SRS server owner can enable or disable them for clients.

Finally you may (or may not...) hear a big difference with the volume sliders for radios. Before this change the lower 1/3 was where you would notice the biggest change in volume, now it is better spread over the entire range of the slider allowing for better fine tuning. This was a long standing bug I'd actually forgotten about... so thanks for the report

**Changelog:**

* Adds a new profile option to opt-out of expansion radios (if they're enabled by the server)
* Adds a new type of Receive ONLY radio - indicated by RX on the overlay to better support the new (and excellent) HB F4
* Linked to the point above - made the second F4 radio RX only
* Fix for the F16 IFF / Transponder turning off when toggling the pilot in the cockpit (yes really...)
* Adds support for Guard on the F15E - thanks to <@176526031119712256> for the video and request
* Adds support for the A10C II volume controls on the AN/ARC-210 VHF/UHF using the menu button - thanks to <@375970201600262146> for reminding me
* Fixed radio volume sliders to more appropriately change volume depending on the position (they're no longer linear internally)
* Fixed the Intercom Ambient Cockpit Audio setting not saving correctly when enabled